9 Best Springs For Trampoline in 2026
This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.
For a full trampoline spring swap, the Blanketown Trampoline Springs 5.5 Inch 72-Pack wins best overall with its thicker-gauge steel and uniform 72-count that covers 12- to 16-foot round frames. If weather resistance matters more, the SkyBound Trampoline Springs 8.5 Inch 48-Pack brings a gold zinc coating that outlasts standard galvanized springs. Budget buyers should check the Cyiwniao Trampoline Springs 5.5 Inch 72-Pack for a barrel-shaped coil that delivers responsive bounce at a lower cost.
The problem with buying trampoline springs is that length, wire gauge, and hook design all affect bounce feel and safety, and most trampolines use a very specific spring size. Getting the wrong length means the mat won’t sit at the right tension, which ruins the jump and can damage the frame.
We researched manufacturer specs, expert round-ups on spring durability, and patterns in owner feedback to find nine kits that cover the most common spring sizes and use cases. This guide matches each pack to the trampoline type and replacement need it fits best.
Top 9 Trampoline Springs in the Market
Certain content that appears on this site comes from Amazon. This content is provided "as is" and is subject to change or removal at any time.
The Best Trampoline Springs, Reviewed
Blanketown Trampoline Springs 5.5 Inch 72-Pack
What We Like
- Thicker gauge than standard retail springs
- All springs identical for predictable bounce
Trade-offs
- 5.5-inch length only fits trampolines designed for that size
- 72-pack is overkill for smaller trampolines under 12 ft
The trade-off is that 5.5-inch springs only work on trampolines built for that exact length, so you have to measure your old spring before buying. But if your trampoline matches this size, the thicker galvanized steel here handles repeated use without sagging, which gives it an edge over lighter-gauge alternatives for high-traffic setups.
Product photos

SkyBound Trampoline Springs 8.5 Inch 48-Pack
What We Like
- Gold zinc coating extends life 50%
- Rubber-tipped hooks for safer installation
- High coil density for responsive bounce
- Full 48-pack with T-hook included
Trade-offs
- 48-pack covers only one standard trampoline
- Heavy gauge steel adds weight during installation
The gold zinc coating on these SkyBound springs is designed to extend their life by 50%, which is a real advantage for parts that sit outside in rain and sun. Each hook end has a rubber tip, so you are less likely to scratch the frame or pinch your fingers during installation. The high coil density gives a firm, responsive bounce that holds up to daily use. This makes the kit a strong fit for families who want their trampoline to feel like new again and stay that way for several seasons.
This is a premium option in both material and price. The 8.5-inch length and 48-count pack are designed for a specific size of trampoline, so if your springs measure shorter (say 5.5 or 6.5 inches), you’ll need to measure carefully before buying.
Product photos

Cyiwniao Trampoline Springs 5.5 Inch 72-Pack
What We Like
- Barrel-shaped coil for responsive bounce
- Galvanized finish resists rust and oxidation
- Angled hooks reduce slipping during use
Trade-offs
- Only 5.5-inch length limits compatibility
- No gloves included for installation comfort
Seventy-two springs in one box means you can replace every spring on a trampoline that uses 5.5-inch springs without hunting for extras. The barrel-shaped coil design, wider in the middle and narrower at the ends, is described as providing reliable tension, strong stretch resistance, and responsive bounce. For anyone maintaining a trampoline, this pack offers the quantity and galvanized steel build needed for outdoor durability.
This set only comes in a 5.5-inch length, so it won’t work if your frame requires 6.5-inch or 7-inch springs. Compared to the Blanketown 72-pack, which shares the same quantity and length, the Cyiwniao set includes a T-hook pull tool but no gloves. That means you’ll want to have a pair of work gloves handy to protect your fingers during installation. It’s a practical, no-frills bulk option for the right size trampoline.
Product photos

MIVIDE Trampoline Springs 5.5 Inch 40-Pack
What We Like
- Heat-treated galvanized steel resists rust
- Slightly curved shape boosts tensile strength
- T-hooks hold firm during jumping
- Fits 8ft to 14ft trampoline frames
Trade-offs
- No installation tool included in the pack
- Only fits 5.5-inch spring trampolines.
A 5.5-inch length and 40-count pack fit most round trampolines between 8 and 14 feet, which covers a wide range of backyard setups. The heat-treated galvanized steel resists rust in humid or wet environments, and the slightly curved shape is more durable and has higher tensile strength than straight springs. That means the springs hold up longer and keep the mat taut, so the bounce stays consistent. If you are replacing old springs on a mid-size frame, this set is a straightforward choice that matches the specs many trampolines need.
Forty springs may not be enough for every frame size, so count your existing springs before ordering. Compared to the Blanketown 72-pack, this MIVIDE set uses a curved profile that is more durable than straight springs, which can improve bounce quality. No pull tool comes in the box, so you will need your own spring puller or pliers. For a typical 10- to 12-foot round trampoline, this set provides the right number of springs without excess.
Product photos

TRIPLE DEER Trampoline Springs 7.5 Inch 24-Pack
What We Like
- Six size options fit many frames
- Rust-resistant galvanized coating
- Reinforced hook design for secure fit
- Multiple pack sizes for any project
Trade-offs
- Only 7.5 inch length offered in this pack
The 7.5-inch length is the only size in this 24-pack, so you must measure your original spring from hook end to hook end unstretched before ordering. The galvanized steel resists rust through humid summers and rainy springs, and the reinforced hook ends grip the frame and mat firmly so nothing slips mid-jump. If your trampoline uses exactly 7.5-inch springs, this pack gives you a straightforward replacement without hunting for odd sizes.
The catch is that this 24-pack works best for partial replacements or smaller trampolines. If your trampoline uses 7.5-inch springs and you only need to swap out a few worn or broken ones, the 24-pack is perfect. For a full replacement on a big trampoline, budget for the larger pack or look at a competitor’s bulk offering.
Product photos

SLNNROA Trampoline Springs 5.5 Inch 75-Pack
What We Like
- Weather-resistant stainless steel construction
- Includes steel puller tool and protective gloves
- Waist-drum design reduces noise and tension
- Thicker-gauge wire for long-term durability
Trade-offs
- Only fits trampolines that use 5.5-inch springs
- Not compatible with 6.5-inch or 8.5-inch trampolines.
This 75-pack of 5.5-inch springs is made from weather-resistant stainless steel, so they resist rust and corrosion in outdoor use. The set includes a steel spring puller with a solid triangle hook and a pair of protective gloves, making installation safer and easier than stretching springs by hand. The waist-drum design, wider in the middle, narrower at the ends, helps reduce operational noise and tension while keeping the bounce responsive. For anyone with a trampoline that uses 5.5-inch springs, this pack provides enough to replace a full set in one order.
Before buying, measure your current springs to confirm they are 5.5 inches long, because this set only fits trampolines designed for that length. If your trampoline requires longer or shorter springs, this pack won’t work. For a trampoline that does use 5.5-inch springs, this SLNNROA set supplies all the springs plus the tool and gloves needed for the job.
Product photos

Skywalker Trampolines Springs 6.5 Inch 12-Pack
What We Like
- Genuine Skywalker OEM component
- Galvanized steel resists rust
- Includes spring puller tool
- Three-year limited warranty
Trade-offs
- Only 12-pack, not a full set
- Fits only listed Skywalker models
The single most decisive fact here is that these are genuine Skywalker Trampolines springs, not a generic substitute. So if your trampoline is one of the nine compatible models listed, you get a part that matches the original design exactly. For owners of those specific Skywalker models who want to replace a few worn or broken springs without re-rigging the whole ring, this 12-pack with its included puller is the straightforward, no-guesswork option.
The main consideration is the pack size: twelve springs is enough to refresh a section or handle a few failures. If you’re planning a full overhaul, you’ll need to buy multiple packs. But for targeted repairs, say the springs around the entry point are sagging or a couple snapped mid-season, this pack keeps the rest of your original setup intact. The three-year limited warranty provides backup against defects.
Product photos

Upper Bounce Trampoline Springs 6.5 Inch 15-Pack
What We Like
- Heavy-duty galvanized steel resists rust
- Enhanced hook curvature stays securely attached
- Higher tensile strength for controlled bounce
Trade-offs
- 15-pack only covers partial replacement on larger trampolines
- 6.5-inch length limits compatibility to specific mat/frame spacing
A 6.5-inch length and heavy-duty galvanized steel construction mean these springs are built to restore a responsive, controlled bounce while standing up to all outdoor weather. The enhanced hook curvature keeps each spring locked onto the frame and mat, so you don’t have to worry about them coming loose. This set suits anyone who needs to replace worn-out springs on a trampoline that uses 6.5-inch springs.
The 15-pack size is the main thing to consider. If your trampoline uses more than fifteen springs, you’ll need to buy multiple sets to do a full replacement. But if you’re just refreshing a few tired spots or keeping spares on hand, this Upper Bounce set gives you premium materials and a secure fit without overbuying.
Product photos

Avoirdus Trampoline Springs 7 Inch 96-Pack
What We Like
- 96-pack covers a full trampoline
- Galvanized steel resists rust and weather
- Waist-drum design increases bounce and tensile strength
- Includes T-hook puller for installation
Trade-offs
- 7-inch length fits only trampolines that use that size
- 3 mm wire is thinner than some heavy-duty options
- No rubber-tipped hooks for quieter operation
Ninety-six springs in one box means you can replace every spring on a standard trampoline without hunting for a second pack. The 7-inch length and 3 mm wire diameter are the sizes listed, and the galvanized steel is described as weather resistant. That waist-drum shape, wider in the middle, narrower at the ends, is designed for better tensile strength and elasticity than straight springs, which can improve bounce and durability.
Seven inches is a specific size. If your trampoline calls for 5.5-inch or 8.5-inch springs, this pack won’t work. Compared to the SkyBound 8.5-inch set, these are a full inch and a half shorter, so measure your old springs carefully before ordering.
Product photos

How We Evaluated Trampoline Springs
Every spring kit was assessed against manufacturer data for wire gauge, coating type (galvanized vs. Stainless vs. Zinc, and the corrosion resistance each provides. We compared hook designs, angled hooks, rubber-tipped hooks, and reinforced curves, for how securely they stay attached during use. Owner feedback patterns told us which springs lose tension fastest and which kits arrived missing pieces.
The three criteria that mattered most were length compatibility (5.5-inch, 6.5-inch, 7-inch, 7.5-inch, and 8.5-inch are the common sizes), pack count relative to typical trampoline needs, and coating quality for outdoor exposure. A spring that fits wrong or rusts through in one season is useless no matter how good the price.
A research-led evaluation has limits: we didn’t test these in a lab. We relied on published specs, expert round-ups, and the patterns in hundreds of owner experiences shared across forums and reviews. If you are tackling a full swap, follow a proper [spring replacement guide first so you do the job safely and evenly.
We also looked at whether each pack includes a [useful trampoline accessories like pull tools and gloves so you don’t make a second trip to buy them separately.
What To Look For In Trampoline Springs
Replacing trampoline springs is not one-size-fits-all. Match your trampoline’s exact spring length, count the number you need, and pick a coating that survives your local weather.
Match the spring length to your trampoline’s mat-to-frame gap, buy enough to replace all at once, and choose galvanized or zinc-coated steel for outdoor durability.
Spring Length and Compatibility
The most critical spec is spring length, usually 5.5, 6.5, 7, 7.5, or 8.5 inches. Measure from hook end to hook end on an existing spring, or check your trampoline manual. Installing the wrong length throws off mat tension, creates uneven bounce, and can stress the frame joints.
Wire Gauge and Coating
Thicker wire (around 3 mm or more) resists stretching over time and gives a firmer bounce. Galvanized steel is the standard rust-resistant choice; zinc-coated or stainless steel options last longer in wet climates. Gold zinc coatings, like the one on the SkyBound kit, add extra years before corrosion sets in.
Pack Count and Installation Tools
A 12- to 15-foot round trampoline needs 72 to 96 springs for a full replacement. Smaller packs work for partial swaps or repairs. Some kits include a spring puller tool and gloves, these save time and prevent pinched fingers during installation.
- Measure the existing spring length end-to-end before ordering.
- Count the total number of springs on your trampoline frame.
- Check whether the kit includes a pull tool or gloves.
- Confirm the hook design, angled or rubber-tipped hooks reduce slippage.
- Verify the coating matches your climate (galvanized for moderate, stainless for coastal).
A full spring replacement every two to three years keeps the bounce consistent and the mat tension even.
Trampoline Springs Compared
The table below compares the nine spring kits by length, pack count, coating, and included extras so you can match the right set to your trampoline size and replacement goal.
| Product | Length | Quantity | Material | Included Tool |
|---|---|---|---|---|
| Blanketown Trampoline Springs 5.5 Inch 72-Pack | 5.5 inches | 72 pieces | Industrial-strength galvanized steel | Spring pull T-hook |
| SkyBound Trampoline Springs 8.5 Inch 48-Pack | 8.5 inches | 48 springs | Stainless steel with gold zinc coating | T-hook |
| Cyiwniao Trampoline Springs 5.5 Inch 72-Pack | 5.5 inches | 72-pack | Galvanized steel | 1 T-hook pull tool |
| MIVIDE Trampoline Springs 5.5 Inch 40-Pack | 5.5 inches | 40 springs | Galvanized steel, heat treated | T-hook |
| TRIPLE DEER Trampoline Springs 7.5 Inch 24-Pack | 7.5 inches | 24-Pack | Galvanized steel | T-hook tool |
| SLNNROA Trampoline Springs 5.5 Inch 75-Pack | 5.5 inches | 75 springs | Stainless steel | Steel spring puller + gloves |
| Skywalker Trampolines Springs 6.5 Inch 12-Pack | 6.5 inches | 12 springs | Galvanized steel | Spring puller |
| Upper Bounce Trampoline Springs 6.5 Inch 15-Pack | 6.5 inches | 15-pack | Galvanized steel | Pull T Hook Tool |
| Avoirdus Trampoline Springs 7 Inch 96-Pack | 7 inches | 96 springs | Galvanized steel | T-hook puller |
Frequently Asked Questions
How do I know what size trampoline springs I need?
Measure the existing spring from the inside of one hook to the inside of the other hook. Common lengths are 5.5, 6.5, 7, 7.5, and 8.5 inches. If you have no old spring, measure the distance between the frame hole and the mat ring, that gap is your spring length.
Can I mix old and new trampoline springs?
It is not recommended. Old springs have stretched and lost tension, so mixing them creates an uneven bounce and uneven mat wear. Replacing all springs at once gives consistent performance and extends the life of the trampoline mat.
How many springs does my trampoline need?
Count the V-rings on the trampoline mat, that number equals the number of springs required. A typical 12-foot round trampoline uses 72 springs, while 14- and 15-foot models often need 96. Check your manual for the exact count.
What is the difference between galvanized and stainless steel springs?
Galvanized steel has a zinc coating that resists rust from normal outdoor exposure. Stainless steel provides better corrosion resistance in coastal or high-humidity areas. For most backyards in moderate climates, a good galvanized spring set lasts three to five years.
How often should I replace trampoline springs?
Replace springs every two to three years for regular backyard use, or sooner if you notice sagging mat corners, squeaking sounds during jumps, or visible rust pitting. A full set swap maintains safe, predictable bounce and protects the mat from uneven tension.
The Bottom Line
The Blanketown Trampoline Springs 5.5 Inch 72-Pack is the best overall pick for anyone doing a full replacement on a 12- to 16-foot round trampoline. The thicker wire gauge and uniform construction deliver consistent bounce without mixing old and new springs.
If your trampoline uses 8.5-inch springs and you want maximum weather resistance, the SkyBound Trampoline Springs 8.5 Inch 48-Pack with its gold zinc coating is worth paying more for. Budget buyers should look at the Cyiwniao Trampoline Springs 5.5 Inch 72-Pack, which gives a barrel-shaped coil for responsive bounce at a more affordable price.
The single most important factor is getting the spring length exactly right, measure twice, order once. Everything else, from coating to pack count, follows from that choice. For families considering a different approach altogether, springless trampolines offer a no-spring design that eliminates pinch points entirely.
